COMW 2026 Specific Features:

• Matches ClassOneModelWorks Road Specific Details

ClassOneModelWorks Road Specific Features:

• Era: 2026

• Accurate ClassOneModelWorks Semiquincentennial Paint Scheme

• GP40-2 Lettering

• LED-Illuminated Number Boards

• LED-Illuminated Step Lights

• LED-Illuminated Walkway Lights

• LED-Illuminated Truck Lights

• LED-Illuminated High, Cab Mounted Headlight

• LED-Illuminated Strobe Light

• LED-Illuminated High Mount Ditch Lights On Front And Rear

• Dynamic Brake Blister (Early Short Forward Taper) With 10-Blade Fan And Dynamic Brake Vent

• Center Cap Grill Over Dynamic Brake Fan

• Nathan K3LA 3 Chime Airhorn, Mounted Near The Rear Radiator Fans

• Frame Mounted Electronic Bell

• EMD Standard Cab Sunshades

• Prototypically Appropriate Arrangement Of Rear View Mirrors And Wind Deflectors On Cab Sides

• Modified Raised Cab Doors

• Lift-Out Cab Base Doors With Stiffening Ribs On Engineer’s Side

• Lift-Out Smooth Cab Base Doors On Fireman’s Side

• Lift-Out Smooth Battery Box Doors

• Blanking Plates Over Cab And Nose Louvers

• Straight Nose Grab Irons

• 81 Inch Low Short Hood With Electric Handbrake

• Nose Toilet Vent

• Rear Number Boards Removed As Per Prototype

• Pilot Plates As Modified By BNSF

• EMD Medium Snowplow With Grab Irons On Front Pilot Plate

• Spare Knuckle Holders On Rear Pilot Plate

• Straight Cut Levers With Extended Handles

• Low Clearance Pilot Step Wells

• 3-Hose MU Hose Clusters With Silver Gladhands

• Late EMD Medium MU Stand On Front

• Early EMD Short MU Stand On Rear

• Pivoting Front And Rear Drop Steps

• Chain On Middle Front And Rear Handrails

• 3600 Gallon Fuel Tank With Snyder Fuel Fillers, Single Vertical Fuel Gauges, And A Round Fuel Gauge On The Engineer’s Side Only

• Center Cap Grills Over Radiator Fans

• “Chicken Wire” Radiator Intake Grills With Etched Diamond Pattern Mesh Screens

• Large Square ECAFB Box

• Three Speed Recorders: First And Second Engineer’s Side Axles And Fireman’s Side Third Axle

• Brake Shoes Between The Axles Of Each Truck Only

• Sand Lines To Outer Axles Only

• AEI Tags

• 4 Tall Jack Pads, 2 Per Side

• RV Air Conditioners

• RCE Antenna & Ground Plane

• GPS Dome

• ETD Antenna On Ground Plane

• Sinclair Mounted On Ground Plane

GP40 General Features:

• Detailed And Painted Cab Interior, Complete With Separate Front Wall, Floor, Back Wall, Control Stand, And Seating

• Sliding Cab Windows

• Cab Interior Sunshades

• Highly Detailed Blomberg Trucks Complete With Traction Motor Detail

• Three (3) Detailed 8 Blade Radiator Fans

• Highly Detailed Underframe Piping, Plumbing, Cabling, And Salem Air Filters

• Prototypical Arrangement Of Sand Lines, Which Flex With Truck Movement

• Metal Handrails And Plastic Stanchions

General Locomotive Features:

• Fully Assembled

• Multiple Road Numbers

• Countless Factory Applied Detail Parts, Such As Grab Irons, Steps, Lifting Rings, Air Hoses, Windshield Wipers, Etc.

• Precise And Quiet Slow Speed Control

• Kadee™ 5 Compatible Metal Couplers

• 5-Pole Skew Wound Motor

• Dual Flywheels

• CNC Machined Wheelsets With RP-25 Contour

• All Wheel Drive

• All Wheel Electrical Pickup

• Directional LED Headlights

• Quality Packaging Safely Stores Model

• 18 Inch Minimum Radius

DCC Sound Equipped Models Also Feature:

• All Fans On Your Model Function Prototypically With Micro-Processor Controlled Tru-Fans™

• Your Choice Of Onboard SoundTraxx™ Tsunami2™ DCC Sound Decoder With CurrentKeepers™ Or Onboard ESU™ LokSound™ 5 DCC Sound Decoder With PowerPack™